Insulation Estimating Software
Insulation estimating software that turns a set of plans into a priced insulation estimate in about 30 minutes — AI measures square footage by R-value and assembly off the plans, no manual takeoff.
Free to try · no login · ~30 minutes to a priced insulation estimate.
Watch P2P estimate insulation from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready insulation estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Insulation estimating is square footage sorted by R-value and assembly, and the assemblies are where it gets fiddly. You're scaling walls, ceilings, and floors off the plans, then cross-referencing the wall and roof schedules to match each area to its R-value and product — R-13 batts in 2x4 walls, R-21 in 2x6, R-38 blown in the attic, rigid board at the foundation, spray foam at the rim. Then you're separating batt from blown from spray and from rigid, because each prices and installs differently, and adding vapor barrier, baffles, and netting where the assembly calls for it. Match the wrong R-value to a wall type or miss a sloped ceiling and your material and labor are both wrong. P2P reads the plans and wall and roof schedules, measures area by assembly, ties each surface to its R-value and insulation type, and applies your coverage and material rates — so you bid an insulation job in minutes instead of an evening cross-checking a finish schedule against a scale ruler.
From insulation plans to a bid-ready number.
Automatic area takeoff by assembly
Upload the plans and the AI measures wall, ceiling, and floor area surface by surface, then ties each area to its R-value and insulation type from the wall and roof schedules.
Batt, blown, spray, and rigid
The takeoff separates batt, blown, spray foam, and rigid board by assembly and adds vapor barrier and baffles where called for, then applies your coverage and material rates.
Bid more insulation jobs
Turn a plan set into a priced insulation estimate in about 30 minutes, so you can bid every job that comes in instead of skipping the ones that aren't worth a night with the schedules.
How a insulation estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Insulation estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first insulation takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Insulation estimating — FAQ
How does AI measure insulation square footage by R-value?
Does it separate batt, blown, spray, and rigid?
Can I set my own coverage and material rates?
How much does an insulation estimate cost?
Do I need an account to try it?
How accurate is the insulation takeoff?
Bid your next insulation job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.