Framing Estimating Software
Framing estimating software that turns a set of plans into a priced framing estimate in about 30 minutes — AI measures linear feet of wall and stud counts off the plans, no manual takeoff.
Free to try · no login · ~30 minutes to a priced framing estimate.
Watch P2P estimate framing from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready framing estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Framing estimating starts with linear feet of wall and ends with a lumber list, and the path between is all counting. You're scaling every wall off the plan, separating exterior from interior and load-bearing from partition, then converting that footage into studs at 16 or 24 on center, plus king and jack studs at every opening, cripples, and blocking. On top of the studs you're tallying plates by the linear foot — top, bottom, and double top — headers by opening size, and sheathing by the sheet. Get the wall lengths or the stud spacing wrong and your lumber package is off by a unit, which is real money on a fixed bid. P2P reads the floor plans and framing plans, measures wall linear footage by type, counts studs at your on-center spacing with openings accounted for, and tallies plates, headers, and sheathing, then prices the package against your own lumber and labor rates — so you bid a framing job in minutes instead of an afternoon counting sticks off a plan.
From framing plans to a bid-ready number.
Automatic wall takeoff
Upload the plans and the AI measures wall linear footage by type, separates exterior, interior, and bearing walls, and converts footage into stud counts at your on-center spacing.
Plates, headers, and openings
The takeoff tallies top, bottom, and double-top plates by linear foot, sizes headers per opening, and counts king, jack, and cripple studs so the lumber list reflects the real frame.
Bid more framing jobs
Turn a plan set into a priced framing estimate in about 30 minutes, so you can bid every job that comes in instead of skipping the ones that aren't worth an afternoon of stud counting.
How a framing estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Framing estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first framing takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Framing estimating — FAQ
How does AI count studs and wall linear feet?
Does it handle plates, headers, and blocking?
Can I set my own lumber and labor rates?
How much does a framing estimate cost?
Do I need an account to try it?
How accurate is the framing takeoff?
Bid your next framing job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.