Concrete Estimating Software
Concrete estimating software that turns a set of plans into a priced concrete estimate in about 30 minutes — AI measures cubic yards, formwork and rebar off the plans, no manual takeoff.
Free to try · no login · ~30 minutes to a priced concrete estimate.
Watch P2P estimate concrete from a real blueprint
Upload a plan set and our AI returns a priced, bid-ready concrete estimate with color-coded markups in about 30 minutes.
Your trade has its own units. So does the AI.
Concrete estimating is volume, formwork, and steel, and every one of them is easy to get wrong. You're pulling footing sizes, slab thicknesses, and wall heights off the plans, multiplying length by width by depth, then converting cubic feet to cubic yards and padding for waste before you can even call the ready-mix supplier. Then you're back at it for the formwork — counting contact square footage for footings, walls, and grade beams — and taking off rebar by size and spacing, tallying linear feet and tie wire by the bar. Drop a digit on a slab thickness or miss the thickened edges and you're either short a truck or eating overage on a fixed bid. P2P reads the structural plans and details, calculates concrete volume in cubic yards by pour, measures formwork contact area, and takes off rebar by bar size and spacing, then prices the mix, forms, and steel against your own labor and material rates — so you bid a concrete job in minutes instead of a day with a calculator and a spec book.
From concrete plans to a bid-ready number.
Automatic yardage takeoff
Upload the plans and the AI measures footing, slab, and wall volume by pour, converts cubic feet to cubic yards, and applies your waste factor so the ready-mix order is right the first time.
Formwork and rebar, counted
The takeoff measures formwork contact square footage and tallies rebar by bar size and spacing, then applies your rates for forms, steel, and tie wire the way you actually bid.
Bid more concrete jobs
Turn a plan set into a priced concrete estimate in about 30 minutes, so you can bid every pour that comes in instead of triaging which ones are worth a day of yardage math.
How a concrete estimate gets built.
Upload your blueprint
Drop a PDF, image, or CAD file — even a messy, multi-sheet set. No login required to start.
AI builds the takeoff
The AI reads the sheets, finds your trade's scope, and measures it — counts, lengths, areas — in minutes, not hours.
Get a priced estimate
It prices the takeoff against your labor and material rates, so you get a bid-ready estimate you just review and send.
Concrete estimating, three ways.
| P2P Estimating | Manual takeoff | Legacy software | |
|---|---|---|---|
| Time per estimate | ~30 minutes | 4–8 hours | 1–3 hours + setup |
| Does the takeoff | AI, automatic | You, by hand | You, point-and-click |
| Priced to your rates | Automatic | Manual spreadsheet | Manual setup |
| Cost | $25–$75 / estimate | Your billable time | $100s/mo + seats |
| No-login trial | Yes | — | Rarely |
Start free. Pay only for estimates you run.
Try your first concrete takeoff free with no login. Paid plans start at $99/mo, and every estimate runs about $25–$75 of credit — far less than the day it replaces.
Other trades P2P estimates
Concrete estimating — FAQ
How does AI calculate concrete cubic yards?
Does it take off formwork and rebar too?
Can I set my own mix and material rates?
How much does a concrete estimate cost?
Do I need an account to try it?
How accurate is the concrete takeoff?
Bid your next concrete job in minutes.
Upload a blueprint and watch the AI build your priced estimate. Free to try, no login.